Industry News

With the continuous progress of science and technology, all walks of life have also been greatly developed, about the AUMA electric actuator its development prospects are also very good, so the demand continues to increase, the market has also increased a lot of manufacturers, and we, as a manufacturer, here is also very necessary to tell you about his small knowledge points, Interested partners can take a look.

Before we use this AUMA electric actuator, there are also a lot of problems with you, so if you want to use it better, you must understand some of its knowledge points. First of all, you should be clear that the AUMA electric actuator mainly uses a certain drive energy and works under a certain control signal. Actuators use liquid, gas, electricity, or other energy sources and convert them into driving actions via motors, cylinders, or other devices. The basic types are partial rotation, multi-rotation and linear drive. In fact, during operation, when the opening or closing torque is pushed instantaneously, the stop valve will stop moving. Even if the main switch of the torque power supply is pushed and closed instantly, the stop valve is still not easy to move, and the direction can be reversed once to clear the torque maintenance. Then on-site remote control can easily change the control, allowing customers to adjust, maintain and save costs. The product can also be used to drive the valve to the fully open or fully closed position. The actuator used to control the valve can move the valve precisely to any position. Although most actuators are used to switch valves, you also need to know that when AUMA electric actuators are designed they go far beyond a simple switching function. They include position sensing devices, torque sensing devices, electrode protection devices, logic control devices, digital communication modules and PID control modules, all of which are installed in a compact housing.

When using AUMA electric actuators, it is also necessary to know that manual operation is replaced by mechanical or automated equipment. The actuator is required to act as the interface between the control system and the mechanical movement of the valve, but also to improve the safety performance of the actuator. And environmental performance. So what you need to understand is that in some dangerous situations, automatic actuator devices can reduce personal injury. Of course, in addition to these, some special valves can also be opened or closed urgently under special circumstances. Valve actuators can prevent further spread of hazards and reduce factory losses. For some high-pressure large-caliber valves, the output torque of the actuator is required to be large, so the actuator is required to improve mechanical efficiency and use a large-output motor, so that the large-caliber valve can run smoothly. For some small torque valves, the AUMA electric actuator also uses a small electric valve, compared with the ordinary type of AUMA electric actuator has the advantages of light weight, compact structure and complete functions. For successful process automation, it is important to ensure that the valve itself can meet the specific requirements of the process and piping medium.

The content of the above article is a basic overview of the AUMA electric actuator introduced by Xiaobian for you. We will bring more wonderful content in the next period. As long as you pay more attention to our website, you will not miss these knowledge points.